1997 Makino Ke-55 Cnc / Conventional 3 Axis Vertical Tool Room Milling Machine

Available to be purchased is this 1997 Makino KE-55 CNC knee plant. This machine is in great condition and capacities as it should. I have experienced this machine cleaning and performing normal deterrent support. The oiling framework has been flushed and filled, ball screws lubed, belts tensioned, and machine cleaned. This unit has the manufacturing plant coolant tank and sump it is simply not envisioned. This is a Fanuc Professional Jn which is a 20FA controller and works incredible. The shaft is a 4000 RPM unit and is extremely smooth. This can do unbending tapping just as helical introduction. This plant is one of a kind in that you can utilize it as a traditional machine with the hand wheels on the front or you can utilize the inherent conversational programming notwithstanding stacking a full CNC program. The conversational is very easy to understand and handles edge processing, pockets, span, jolt opening examples, and more. Scarcely any preparation is required to utilize it. This machine is equipped for DNC (dribble cnc) through the RS232 port on the control bureau.

This factory weighs 6500 pounds and has a heavy solid metal base for greatest unbending nature. Every one of the slides are of the case way configuration are ground and solidified with the ways being hand scratched Turcite. Everything is naturally greased up with a Showa oil siphon. The machine is worked with larger than usual and tensioned ball screws to keep the impacts of warm development. The T-opened table is in extraordinary condition with no drill or factory stamps on it.

I have all the first manuals (extensive stack) and even the first review report for this machine when it was sent. This is an exceptionally superb processing machine that doesn’t come available to be purchased regularly. These were over the top expensive when new thus they are not normal to discover.

Review Title $19,000.00
  • 9.2/10
    Value - 9.2/10
  • 6.8/10
    Style - 6.8/10
  • 9.6/10
    Cover - 9.6/10
  • 7.4/10
    Design - 7.4/10


  • X Axis Travel 32″
  • Y Axis Travel 20″
  • Z Axis Travel 24″
  • 220 V 3 phase 
  • Weight Approx 6800 lbs
  • Quill Travel 5″
  • Centurion 6 controls with Flash Drive
  • NMTB-30 taper